|
Written by admin
|
|
01/01/2001 |
|
Line serves for pouring PU mixture to the open moulds
Power 10 - 70 ml per sec
Double-skin Containers Without Pressure For Isocyanate And Polyol
- volume of containers is 250 l, are equipped with stirrers with electric motor
- material hopper on the cover of each container is equipped by silica-gel air drying
- cooling and heating by oil and circulatory pumps
- indicating of oil level increase
- heating of oil by electric convector, cooling by cooling unit with closed circuit
- continuous level indication of each component on the main control panel and touch LCD display
- each container is equipped with pump for filling of containers from barrels
- heated suction pipeline for components
Component Dosing
- two accurate dosing gear pump with cycloidal gear box and electromotor
- components are cleaned before entering the pumps, shell of filter is heated
- pumps are heated
- reading of component pressure with blocking of pump running during overrunning of maximal value
|
Head Suspension
- mixing head is fixed on the carrier, what is longitudinally moved on the arm
- automatic longitudinal movement over the unit by pneumatic cylinder
- automatic longitudinal movement of carrier with head over the unit
- manual, crosswise movement of arm on the arc frame of form carrier
- after pressing START button on the head carrier is position during pouring automatically stabilized by brake of crosswise movement
- position of head with respect to the axe of units is read by inductive sensors
- position, in which the unit is situated, is displayed on the touch LCD display
|
Mixing Head
- is constructed for two PUR components, with the possibility of supply of colour concentrate
- coloring device (container for colours) cab be bought individually, see accesorries
- inlet for rinsing by rinsing medium and blowing
- mixing of both component is executed by rotary mixer with electromotor over the toothed belt
- setting up of the accurate revolutions of mixer is displayed on the LCD display (RPM)
- inlet and recycling pressure hoses are heated
- mixing chamber is equipped with the cooling shell for water cooling from external aggregate
|
Rinsing Of Mixing Head
- pressure tank with the volume of 45l
- continuous indication of level on the main switchboard and on the LCD display
- emergency control of rinsing
|
Units Moulds Bracket
- construction is made of 6, 12, 18 or 24 modular sections
- unit for fixing of two-piece or three-piece moulds with the maximal volume W240xL420xH230mm
- units opening and closing by the pneumatic cylinder with mechanical lock during closing- fully electric control for each unit
- closing is two-hand after pouring is automatic or manual opening is automatic or manual
- setting up of lean of unit with range ± 10°
- each lower desk of unit is heated adjustable regulation always for 6 units
|
Main Switchboard
- control of motors for container filling, of stirrers, of heating and cooling pumps and of dosing pumps
- set up and regulation of temperature of heated hoses, of oil, of dosing pumps and filters
- display of components temperature in containers for POLYOL and ISOCYANATE
- setting up and control of unit temperature, common for 6 units
- blocking of running during the deviation of actual temperature and set temperature
- display of level of POLYOL and ISOCYANATE
- blocking of running during shortage of one of component and during the rinsing
- switch “holding operation” for saving of energy during shot-down of production
- automatic switching off dosing pumps during overrun of maximal pressure
- colour touch LCD display
|
Colour Touch LCD Display
- setting up of desired flow rate of mixture from head (ml/s)
- setting up of desired volume rate of ISOCYANATE to 100% of POLYOL
- counter for cycles of pouring, rinsing, operating hour, number of product
- setting up of doses for each unit individually (ml)
- calculated time is automatically displayed from setting dose and discharge
- setting up of time and of day in the week for automatic switching of heating the moulds (preheating before starting the production)
- setting up of correct revolutions of head stirrer for pouring and individually for rinsing RPM
- setting up of production batch for regular notice to the number of made products
- setting up of time for looping the operation of stirrers of components in containers and pumps for oil
- report “rinsing necessary” if the material stays in head without rinsing for longer time than is setting
- possibility of prevention of change the important technical parameters by the help of password
- operating report (“minimal level”, “air pressure decrease”, “temperature out of working range
- breakdown report (“ circuit breaker breakdown”, failure phase”, “button error” ….) |
Control Panel Next To The Head
- switch / switch off of electromotor for head of stirrer
- control of carrier brakes and arm
- control of backsplash, pouring, rinsing and blowing
- switch / switch off of the inlet of colour concentrate 1 and 2
- touch monochrome LCD display for setting and control of the device state
- function of “start” button placed in grip is automatically changed according the position of head
|
|
|
|
Technical Parameters
|
Number Of Section
|
|
6
|
12
|
18
|
24
|
| |
|
|
|
|
|
|
Length (mm)
|
|
4900
|
4500
|
5200
|
6100
|
| |
|
|
|
|
|
|
Wiegth (mm)
|
|
4000
|
4300
|
4400
|
5400
|
| |
|
|
|
|
|
|
Hight (mm)
|
|
2400
|
2200
|
2100
|
2200
|
| |
|
|
|
|
|
|
Weight (kg)
|
|
7600
|
7610
|
7860
|
8110
|
|
Product / Shift
|
|
300 - 400 |
600 - 1000 |
800 - 1200 |
1600 - 2000 |
|
Closing Station
|
|
Automatically / Hand
|
|
Shift Between Station
|
|
Hand
|
|
Shift above Form
|
|
Automatically
|
|
Electric Input
|
|
17
|
18
|
19
|
20
|
|
Voltage
|
|
3 ~ 400V / 50Hz
|
|
Air Pressure
|
|
0,7 MPa
|
|
Delivery time (month)
|
|
5
|
Dimensions - 24 section
|
Suitable accesories for machine
Air Drier Freezing – for totally dry air in press containers
Heating and cooling agregate – cool or heat of material in double tube (duplicated) containers
Cleaning PU – liquid cleaner hot for removing the PU material from metal elements
Containers for cleaning – suitable for use with cleaning PU
Scale – for calibration of machine and check of products quality
Photogallery
Catalogue
|
|
Last Updated ( 14/05/2009 )
|
PRODUCTS 
