The machine is intended for pouring PU compounds using two separately operated heads.
SA standard delivery consists of piston pumps with the dose extent 5 – 35 ml and with a fixed mixing ratio 100:25 (possibility of delivery with different parameters)
RThe machine frame is provided with traversing wheels and with adjusting screws. Component bins, dosing piston pumps, an electric switchboard and a revolving arm are located thereon. From the revolving arm, the material is fed through heated up hoses having the length of 5 m into the heads. The carrier of hoses and heads is not component part of the machine.
•MANUAL OPERATION - The function of the heads is controlled from the switchboard panel
•AUTOMATIC OPERATION - The function is controlled by means of external in and outlets.
Pressure component bins
- one-jacket, galvanized
- polyol 120 litres, isocyanate 60 litres, rinsing agent 22 litres
- (possibility of delivering other ones)
- flow filters for intercepting impurities behind the outlet cocks
- removable bin covers
- continuous level scanning
- with all bins, reduction valve with manometer, safety valve and cocks for inlet and
- compressed air releasing
- common molecular compressed air drier
- with the polyol bin, material agitator with electric drive
|
Low-pressure mixing head
- lightweight construction of duralumin
- the mixing operation is ensured by a lamella agitator driven by a pneumatically operated motor
- agitator revolutions metering by means of an induction scanner
- inlet for liquid rinsing and for dry compressed air blowing through
- two separately operated heads
|
|
DComponent dosing pumps
- twin plunger pumps with pneumatic drive
- one pump for each head
- electronic metering of the stroke length
- before entering the pump, the components are filtered
- firmly set ratio (according to the pumps delivered)
- checking of the pumps function through the components off-take on the pump outlet.
![images/stories/FLV/Film.avi]()
|
|
Control panel
- control of the electric motor of the polyol bin agitator
- switching on/off of the pneumatic motors of the mixing heads
- control of spray-off, pouring, rinsing and blowing through for each head
- switching over of automatic and manual machine operation
- regulation and display of the hose temperature
- display of the component levels height
- LCD touch-sensitive display screen for setting, control and monitoring of the machine state
|
Touch-sensitive LCD colour display screen
- setting of the required pouring dose for each head (ml)
- counters of operating hours
- setting of speeds and times of the agitator runing cycling in the polyol bin
- reporting „WASHING NEEDED“,when material remains for a longer time in the head than set
- possibility of avoiding changes of important technological parameters using a password
- operating reports (drop and minimum of levels, drop of compressed air...)
- fault reports (fault of circuit breaker, converter...)
|
Technical parameters
|
Bins volume
|
POLYOL |
120 liters |
| ISOCYANATE |
60 liters |
| WASH |
22 liters |
|
Componets temperature
|
heated hose (max. 80°C) |
|
Dosing pumps
|
Polyol
|
typical 31,2 cm3/stroke ( defined You ) |
|
Isocyanate
|
typical 7,8 cm3/stroke ( defined You ) |
| dose setting |
5 - 35 ml v unchangeable ratio 100:25 |
| Heads number |
2 |
| Pumps number |
2 |
|
|
| Pressure air |
0,7 MPa |
| Consumption air |
150 l / min. |
| Air Drier |
molecular |
| Electric supply |
1x 230 V, 50 Hz |
|
Max. electric input
|
10 A |
| Prostředí |
Basic |
| Weight |
cca. 1100 kg |
|
|
|
Dimension
|
|
Suitable accesories for machine
Photogallery
Catalog CZ
Catalog EN
|
/thumbs/phoca_thumb_s_Drtic PLC 003.jpg)
REMONT PU machines 
